Changes between Version 6 and Version 7 of TracUpgrade


Ignore:
Timestamp:
Mar 21, 2016, 6:54:06 PM (8 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracUpgrade

    v6 v7  
    11= Upgrade Instructions =
    22[[TracGuideToc]]
    3 
    4 A [TracEnvironment Trac environment] needs to be upgraded before it can be used with Trac 0.11. This document describes the steps necessary to upgrade an environment.
     3[[PageOutline(2-4,,inline,unnumbered)]]
     4
     5== Instructions ==
     6
     7Typically, there are seven steps involved in upgrading to a newer version of Trac:
     8
     9=== 1. Bring your server off-line
     10
     11It is not a good idea to update a running server: the server processes may have parts of the current packages cached in memory, and updating the code will likely trigger [#ZipImportError internal errors].
     12
     13=== 2. Update the Trac Code === #UpdatetheTracCode
     14
     15Get the new version as described in TracInstall, or your operating system specific procedure.
     16
     17If you already have a 0.12 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation:
     18
     19{{{
     20# easy_install --upgrade Trac==1.0
     21}}}
     22
     23If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]).
     24
     25You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions.
     26The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical:
     27 * on Linux: `/usr/lib/python2.X/site-packages`
     28 * on Windows: `C:\Python2.X\lib\site-packages`
     29 * on MacOSX: `/Library/Python/2.X/site-packages`
     30
     31You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. (The exact location depends on your platform.)
     32
     33This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things.
     34
     35=== 3. Upgrade the Trac Environment === #UpgradetheTracEnvironment
    536
    637Environment upgrades are not necessary for minor version releases unless otherwise noted.
    738
    8 == Instructions ==
    9 
    10 Typically, there are four steps involved in upgrading to a newer version of Trac:
    11 
    12 === Update the Trac Code ===
    13 
    14 Get the new version as described in TracInstall, or your operating system specific procedure.
    15 
    16 If you do a manual (not operating system specific) upgrade, you may also later on want to remove the existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory.
    17 
    18 The location of the site-packages directory depends on the operating system, and the location in which Python was installed. However, the following locations are common:
    19  * If you’re using Linux: /usr/lib/python2.X/site-packages
    20  * If you’re using Windows: C:\Python2.X\lib\site-packages
    21  * If you’re using MacOSX: /Library/Python2.X/site-packages
    22 
    23 You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac` (the exact location depends on your platform).
    24 
    25 If you had the webadmin plugin installed, you can now uninstall it as it is now part of the Trac code base.
    26 
    27 === Upgrade the Trac Environment ===
    28 
    2939After restarting, Trac should show the instances which need a manual upgrade via the automated upgrade scripts to ease the pain. These scripts are run via [TracAdmin trac-admin]:
    3040{{{
     
    3444This command will do nothing if the environment is already up-to-date.
    3545
    36 Note that if you are using a PostgreSQL database, this command will fail with the message that the environment can only be backed up when you use an SQLite database. This means that you will have to backup the repository and the database manually. Then, to perform the actual upgrade, run:
     46Note that a backup of your database will be performed automatically prior to the upgrade.
     47This feature is relatively new for the PostgreSQL or MySQL database backends, so if it fails, you will have to backup the database manually. Then, to perform the actual upgrade, run:
    3748{{{
    3849trac-admin /path/to/projenv upgrade --no-backup
    3950}}}
    4051
    41 If you are using custom CSS styles or modified templates in the templates directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
    42 
    43 === Update the Trac Documentation ===
     52=== 4. Update the Trac Documentation === #UpdatetheTracDocumentation
    4453
    4554Every [TracEnvironment Trac environment] includes a copy of the Trac documentation for the installed version. As you probably want to keep the included documentation in sync with the installed version of Trac, [TracAdmin trac-admin] provides a command to upgrade the documentation:
     
    4857}}}
    4958
    50 Note that this procedure will of course leave your `WikiStart` page intact.
    51 
    52 === Trac Macros, Plugins ===
    53 The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of ClearSilver and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
    54 
    55 === Restart the Web Server ===
     59Note that this procedure will leave your `WikiStart` page intact.
     60
     61
     62=== 5. Refresh static resources ===
     63
     64If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command:
     65{{{
     66trac-admin /path/to/env deploy /deploy/path
     67}}}
     68this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`.
     69
     70Some web browsers (IE, Opera) cache CSS and Javascript files aggressively, so you may need to instruct your users to manually erase the contents of their browser's cache, a forced refreshed (`<F5>`) should be enough.
     71{{{#!comment
     72Remove above note once #9936 is fixed.
     73}}}
     74
     75=== 6. Steps specific to a given Trac version  ===
     76
     77==== Upgrading from Trac 0.12 to Trac 1.0 ==== #to1.0
     78
     79===== Python 2.4 no longer supported =====
     80The minimum supported version of python is now 2.5
     81
     82===== Subversion components not enabled by default for new installations
     83The Trac components for Subversion support are no longer enabled by default. To enable the svn support, you need to make sure the `tracopt.versioncontrol.svn` components are enabled, for example by setting the following in the TracIni:
     84{{{
     85[components]
     86tracopt.versioncontrol.svn.* = enabled
     87}}}
     88The upgrade procedure should take care of this and change the TracIni appropriately, unless you already had the svn components explicitly disabled.
     89
     90
     91===== Attachments migrated to new location
     92Another step in the automatic upgrade will change the way the attachments are stored. If you're a bit paranoid, you might want to take a backup of the `attachments` directory before upgrading (but if you are, you already did a full copy of the environment, no?). In case the `attachments` directory contains some files which are //not// attachments, the last step of the migration to the new layout will fail: the deletion of the now unused `attachments` directory can't be done if there are still files and folders in it. You may ignore this error, but better go have a look to these files, move them elsewhere and remove the `attachments` directory manually to cleanup the environment. The attachments themselves are now all located in your environment below the `files/attachments` directory.
     93
     94===== Behavior of `[ticket] default_owner` changed
     95Prior to 1.0, the owner field of new tickets always defaulted to `[ticket] default_owner` when the value was not empty. If the value was empty, the owner field defaulted to to the Component's owner. In 1.0 and later, the `default_owner` must be set to `< default >` to make new tickets default to the Component's owner. This change allows the `default_owner` to be set to an empty value if no default owner is desired.
     96
     97
     98==== Upgrading from Trac 0.11 to Trac 0.12 ====
     99
     100===== Python 2.3 no longer supported =====
     101The minimum supported version of python is now 2.4
     102
     103===== SQLite v3.x required =====
     104SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details.
     105
     106===== PySqlite 2 required =====
     107PySqlite 1.1.x is no longer supported. Please install 2.5.5 or later if possible (see [#Tracdatabaseupgrade Trac database upgrade] below).
     108
     109===== Multiple Repository Support =====
     110The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration.
     111
     112This may be of interest to users with only one repository, since there's now a way to avoid the potentially costly resync check at every request.
     113
     114===== Resynchronize the Trac Environment Against the Source Code Repository =====
     115
     116Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[trac:#6120 No changeset ??? in the repository]" while browsing the source through the Trac interface:
     117
     118{{{
     119trac-admin /path/to/projenv repository resync '*'
     120}}}
     121
     122===== Improved repository synchronization =====
     123In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories.
     124
     125While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories.
     126
     127Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references and [TracWorkflow#Howtocombinethetracopt.ticket.commit_updaterwiththetestingworkflow here], as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications.
     128
     129===== Authz permission checking =====
     130The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions (with `trac-admin $ENV permission remove` or the "Permissions" admin panel).
     131
     132===== Microsecond timestamps =====
     133All timestamps in database tables (except the `session` table) have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to `datetime()`), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000.
     134
     135==== Upgrading from Trac 0.10 to Trac 0.11 ====
     136===== Site Templates and Styles =====
     137The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information.
     138
     139If you are using custom CSS styles or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
     140
     141===== Trac Macros, Plugins =====
     142The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
     143
     144===== For FCGI/WSGI/CGI users =====
     145For those who run Trac under the CGI environment, run this command in order to obtain the trac.*gi file:
     146{{{
     147trac-admin /path/to/env deploy /deploy/directory/path
     148}}}
     149
     150This will create a deploy directory with the following two subdirectories: `cgi-bin` and `htdocs`. Then update your Apache configuration file `httpd.conf` with this new `trac.cgi` location and `htdocs` location.
     151
     152===== Web Admin plugin integrated =====
     153If you had the webadmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11.
     154
     155=== 7. Restart the Web Server === #RestarttheWebServer
     156
    56157If you are not running [wiki:TracCgi CGI], reload the new Trac code by restarting your web server.
    57158
    58159== Known Issues ==
     160
     161Things you should pay attention to, while upgrading.
     162
     163=== Customized Templates
     164
     165Trac supports customization of its Genshi templates by placing copies of the templates in the `<env>/templates` folder of your [TracEnvironment environment] or in a common location specified in the [[TracIni#GlobalConfiguration| [inherit] templates_dir]] configuration setting. If you choose to do so, be wary that you will need to repeat your changes manually on a copy of the new templates when you upgrade to a new release of Trac (even a minor one), as the templates will likely evolve. So keep a diff around ;-)
     166
     167The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation, as this is more robust in case of changes: we usually won't modify element `id`s or change CSS `class`es, and if we have to do so, this will be documented in the TracDev/ApiChanges pages.
     168
     169=== !ZipImportError ===
     170
     171Due to internal caching of zipped packages,  whenever the content of the packages change on disk, the in-memory zip index will no longer match and you'll get irrecoverable !ZipImportError errors. Better anticipate and bring your server down for maintenance before upgrading.
     172See [trac:#7014] for details.
     173
     174=== Wiki Upgrade ===
     175`trac-admin` will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version.
     176
     177=== Trac database upgrade ===
     178
     179A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434].
     180
    59181=== parent dir ===
    60182If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work.
    61 === some core modules won't load ===
    62 This can happen in particular with Python 2.3 on Windows when upgrading without uninstalling first.
    63 Some modules were previously capitalized and were changed to lower case, e.g. trac/About.py became trac/about.py. You may find such messages in the Trac log:
    64 {{{
    65 ERROR: Skipping "trac.about = trac.about": (can't import "No module named about")
    66 }}}
    67 Remove the `Lib/site-packages/trac` folder and reinstall.
    68 === Wiki Upgrade ===
    69 `trac-admin` will not delete or remove pages that were in version 0.10 but now are not in version 0.11, such as WikiMacros.
    70 
    71 == Changing Database Backend ==
    72 == SQLite to PostgreSQL ==
    73 
    74 The [http://trac-hacks.org/wiki/SqliteToPgScript sqlite2pg] script on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating a SQLite database to a PostgreSQL database
    75 
    76 == Older Versions ==
    77 
    78 For upgrades from former versions refer to wiki:0.10/TracUpgrade.
     183
     184== Related topics
     185
     186=== Upgrading Python ===
     187
     188Upgrading Python to a newer version will require reinstallation of Python packages: Trac of course; also [http://pypi.python.org/pypi/setuptools easy_install], if you've been using that.  Assuming you're using Subversion, you'll also need to upgrade the Python bindings for svn.
     189
     190==== Windows and Python 2.6 ====
     191
     192If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [http://alagazam.net/ Alagazam], which has the Python bindings readily available (see TracSubversion).  The good news is, that works with no tweaking.
     193
     194=== Changing Database Backend ===
     195
     196The [http://trac-hacks.org/wiki/TracMigratePlugin TracMigratePlugin] on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating between SQLite, MySQL and PostgreSQL databases.
     197
     198=== Upgrading from older versions of Trac === #OlderVersions
     199
     200For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions].
    79201
    80202-----